Expense recoveries are the operating costs a landlord bills back to tenants under their leases. The best known is common area maintenance (CAM), which ICSC defines as the cost of maintaining and managing the shared areas of a commercial property. Depending on the lease, real estate taxes and insurance are often recovered too. Under a pro rata lease, each tenant pays its share of those costs, and the landlord reconciles what was charged against what was actually spent once a year.
For a budget, that means projecting every tenant’s recoveries from its own lease terms, against expense pools that can span several buildings. Rockport BUDGET (formerly rBudget) builds those pools, calculates each tenant’s recoveries from the rent roll, and posts the charges into the budget.
Every recovery calculation answers five questions for each tenant: which costs are shared, how the share is measured, where the tenant starts paying, how fast the charge can grow, and how a partly empty building is treated.
Recoveries are hard because they depend on two inputs that both move: the rent roll and the expense budget. Change either one, and every tenant’s charge can change with it.
Rockport BUDGET builds recovery pools in two places: at the budget level, where a pool is shared by every building in the budget, or at a single property. Shared pools suit standardized assumptions, for example, pools for speculative tenants.
Rockport BUDGET calculates recoveries from the same rent roll the budget uses. Each tenant’s recovery lines carry the charge code from the accounting system and the pool assigned to them. When the budget is ready, the user runs the calculation, and the resulting charges post to the tenant’s charge column.
Rockport BUDGET refreshes rent rolls nightly from the accounting system and imports actuals for reforecasting. It integrates with JD Edwards, MRI®, and Yardi® but it does not push those changes into the budget automatically. The Rent Roll Reconciliation Wizard shows the budget owner what differs between the budget’s rent roll and the accounting rent roll imported the night before, and lets them choose what to bring in.
Actuals can’t be edited because they are the true figures from the accounting system, and the budget has to stay in step with it. In a reforecast model, actuals overlay the budget account by account for the months that have closed. Users reforecast only the remaining months, using the actuals as a guide.
The left column describes a typical spreadsheet-based recovery process, not any specific firm.
|
Factor |
Recovery spreadsheet |
Rockport BUDGET |
|
Pool setup |
Rebuilt or copied per building, per year |
Built once at budget or property level from groups of accounts |
|
Tenant shares |
A formula per tenant, per pool |
Custom denominators, stops, and caps in the recovery setup |
|
Lease changes |
Found by comparing reports by hand |
Reconciliation Wizard lists lease changes from the nightly import |
|
Actuals |
Pasted in, and can be overwritten |
Imported from accounting and locked |
|
Portfolio view |
Consolidated in another workbook |
Portfolio reports consolidate every building in the budget |
|
Who can edit |
Anyone with the file |
Permissions by tab and role, with an audit log |
Real estate budgeting software should calculate recoveries from the same rent roll and expense budget the rest of the model uses, so a change to either flows through without a rebuild. Whichever system you evaluate, these questions separate a recovery engine from a recovery report:
Rockport BUDGET is built for owners, operators, and investment managers of office, retail, industrial, and mixed-use portfolios. It is designed for the people who build the budget day to day, including property managers, leasing teams, and engineers, as well as accounting and asset management.
CAM is the cost of maintaining and managing the shared areas of a commercial property, such as lobbies, hallways, parking lots, and landscaping. Tenants usually pay a share of it under their lease, often based on the space they lease.
Both limit a tenant’s recoveries to costs above a threshold. A base year sets that threshold at the costs of a reference year, usually the year the lease starts. An expense stop sets it at a stated amount. The two terms are sometimes used interchangeably, so the lease wording is what counts.
A CAM cap limits how much a tenant’s CAM charges can increase each year. Rockport BUDGET lets users add caps as part of its recovery setup.
A gross-up adjusts operating expenses to what they would have been had the building been fully occupied. It often matters in base year leases, where a base year with low occupancy would otherwise make later increases look larger than they are. Whether a gross-up applies, and to which expenses, depends on the lease.
Yes, recovery pools can be built at the budget level and shared by every building in the budget, or built at a single property.
JD Edwards, MRI®, and Yardi®. Rent rolls refresh nightly, and the budget owner chooses which lease changes to bring into the budget.
Not for detailed multifamily budgeting. Rockport BUDGET supports office, retail, industrial, and mixed-use properties.
Your own timeline depends on the number of properties and how your chart of accounts and charge codes are set up.
If your recoveries live in a workbook only one person understands, send us the building that gives your team the most trouble. We'll show you how it would run in Rockport BUDGET. Contact us →
Related reading
Posted by Rockport Editorial Team